Italiano English

Products



Non-destructing testing sector solutions

CASONI SRL always focuses its attention on the customer's requests, creating specific products, able to completely satisfy the current inspecting process situation. Successively to the start of the collaboration between CASONI SRL and Waygate Technologies, CASONI SRL is able to generate also standard products for design and dimension (UTS Systems). Nonetheless, they still offer a high percentage of customization thanks to the possibility to install one of the many accessories available.


APPLICATION FIELDS
EDDY CURRENT PROBES
S-1115-CAS-0

Eddy current probe for checking thin wires and tubes with a diameter from 0.3 to 4 mm....

ENCIRCLING COIL S 1115-CAS

Repairable circular coil, in different sizes based on the tube diameter or the wire to inspect (on r...

COIL S 1096

Circular coil equivalent to the Prueftechnik (LAB)type size 1,2,3. It is repairable....

COIL S 1115

Circular coil equivalent to the Foerster (LMD) type size 1,2,3. It is repairable....

COIL S 1196

Circular coil equivalent to the Rohmann (ULAD) type size 1,2,3. It is repairable....

COIL S 1244

Circular coil equivalent to the Schumatronic type. It is repairable....

COIL S 1292

Sector coil equivalent to Rohamnn type. It is repairable. ...

COIL S 1292-HT

High temperature sector coil for weld inspection up to 600°. It is repairable. ...

S 1017

Pencil probe for detection of surface cracks, with sensor at 90° on shank diameter....

S 1110

Pencil probe, with 90° angle....

S 1141

Probe for systems with sensitive zone in fiberglass on the final section. The sensor is at 90° ...

S 1153

Pencil, bridge, schielded probe for detection of surface cracks....

S 1154

Probe with shank flexed at 20° and sensor at 90°(length 10 mm)....

S 1173

Systems probe with fiberglass head and integrated cable of 2, 4 or 6 meters....

S 1301

System, pencil probe with cable integrated length 2, 4 or 6 meters....

S 1330

Shaped probe that can inspect in one time a maximum area of 60 mm with an optimal sensibility of the...

S 1330-5 WITH 5 SENSORS

Probe with five sensors. In five steps it inspects completely the coupling of the blade to the rotor...

S 1330-5C WITH 5 CHANNELS

Special probe for helicopter blade inspections, with five separate channels and only one instrument ...

S 1401-400F

Straight beam probe used to inspect non misshaped metal sheets . It is able to identify holes on me...

S 432

Pencil probe, shielded. Particularly responsive when applied on various kinds of materials like alum...

S 580

Pencil probe, absolute, shielded. Its shape allows a versitile and easy inspection, it also has an o...

S 637

Eddy current shielded probe with a 20° bent shaft surface probe and a sensor placed at 90°...

S 670

Pencil probe, shielded. Its shape allows a versatile and easy inspection, and its sensibility is alw...

S 79

Pencil probe, non-ferrous, absolute. The small and thin shape allows a versitile and easy inspection...

S 80

Pencil probe, absolute and iron. Its small and thin shape allows a versatile and simple inspection, ...

S 81

Straight beam probe, with springs, absolute, shielded. It guarantees a constant pression on the surf...

S 82

Probe for surfaces, springy, absolute. It guarantees a constant pression on the surface to inspect i...

S 890

Expansion probe, manual, for holes with a good sensibility. It can be an absolute, differential or a...

S 891

Fixed probe, manual, expanding,for holes. It can be an absolute, differential or bridge probe and al...

S 893

Probe for surfaces, low frequency. Ideal for inspections under the surface of non-magnetic materials...

S 912

Probe built totally in steel with a point sensor. It is equipped with a built-in cable of 2, 4 or 6 ...

S 913

Probe built totally in iron with a sensor at 90° on the side of the shank. It is equipped with ...

S 927

Probe suitable to check the hardness of materials and the difference of composition of the various m...

S-454

Probe for surfaces absolute, necessary for differential devices with transformer system. The sensor ...

S-936

Absolute probe for temper inspections....

SH 884

Probe for slightly magnetic tubes (from a 12 mm diameter to 26 mm) with a permanent magnet that allo...

SH 884 D

Probe for slightly magnetic tubes (from 12 mm to 26 mm diameter)with a permanent magnet that allows ...

SH 884-2

Probe for slightly magnetic inner tube inspection (from 9,5 mm to 26 mm diameter). The test can be c...

SI 872

Probe for the inspection of the internal part of non-magnetic tubes ( from a 9,5 mm to a 26 mm diame...

SI 872 D

...

SI 872-2

...

SR 490

...

SRC 491

Rotating probe with centering device, in plastic delrin (similar to teflon) that is placed correctl...

SRE 493

Rotating expanding probe in steel. It is differential and has an excellent signal/flaw combination t...

SREP 494

Rotating probe, expanding, in plastic. It is exclusively differential and offers an excellent signal...

SRP 499

Rotating probe, fixed, in plastic. It ensures a perfect rotation without vibrations, but it is also ...



In Collaboration with: