Products
Non-destructing testing sector solutions
CASONI SRL always focuses its attention on the customer's requests, creating specific products, able to completely satisfy the current inspecting process situation. Successively to the start of the collaboration between CASONI SRL and Waygate Technologies, CASONI SRL is able to generate also standard products for design and dimension (UTS Systems). Nonetheless, they still offer a high percentage of customization thanks to the possibility to install one of the many accessories available.APPLICATION FIELDS
LT-600 is a module designed for the UTS-750PA. The maximum surface of the test object is of 600 x...
RT-400 is a module for the automatic system UTS1 designed for the ultrasonic inspection of mechanica...
RT-800 is a module for the automatic system UTS1 designed for the ultrasonic inspection of mechanica...
RTA-400R is a module for the automatic system UTS2-R designed for the ultrasonic inspection of mecha...
RTM-400_S is an UTS1 series module designed for the non-destructive ultrasonic inspections of mechan...
RTM-800_D is an UTS1 module designed for the non-destructive ultrasonic inspections of mechanical pa...
RO-400 is a module for the automatic system UTS1 designed for the ultrasonic inspection of mechanica...
RO-600 is a module for the automatic system UTS1 designed for the ultrasonic inspection of mechanica...
RO-600_M is a module for the automatic system uts1 designed for the ultrasonic inspection of mechani...
RO-800_S is a module for the automatic system UTS1 designed for the ultrasonic inspection of mechani...
RO-1400_M is a module designed for the inspection of mechanical parts with small/medium dimensions. ...
TS-400 is an accessory of UTS-500 and UTS-750 automatic systems designed for the ultrasonic inspect...
TS-600 is a module for the UTS1 series designed for the ultrasonic inspection of mechanical parts of...
TS-800 is an accessory of UTS-750 automatic system designed for the ultrasonic inspection of mechani...
SP-20 is a manual probe manipulator accessory of the UTS automatic systems for the manual and motor...
SP-30 is a probe manipulator with UHF connector which has three different regulations: • R ad...
SP-20 PA allows the angular adjustment of the probe inclination within the scan volume. SP-20 PA ...
SP-20M is an accessory for the automatic system UTS1 designed for the ultrasonic inspection of mecha...
SP-20M_2 permits the marking of the test objects at some particular points, for example in correspon...
SP-20H allows the angular adjustment of the probe inclination within the scan volume. SP-20H is a...
SP-20V allows the angular adjustment of the probe inclination within the scan volume. SP-20V is a...
Kit for eddy current testing, including a S 1330 probe,cable and certificate of conformity. The shoc...
Paint marker using a sprayer gun, tank for paint, and pneumatic accessories to run the device. It...
Teflon adhesive tape, thickness 0,3 mm for the protection against wear of the eddy current probes....
These accessories are used to hold the encircling coil and the guide sleeves, when, under control th...
It allows to keep the coil suspended over the welding joint of the tube, and is equipped with adjust...
Push and pull cable gun for the EC automatic and/or manual inspection of inner tubes. - Cable diame...
It's a saturator where the magnetic field is generated by permanent magnets. The magnetic field is ...
It's used to center the saturator, the coil holder or the demagnetizer, compared with the tube quote...
Very precise centering system. It is used when there is the need of centering tubes or bars perfect...
