Products
Non-destructing testing sector solutions
CASONI SRL always focuses its attention on the customer's requests, creating specific products, able to completely satisfy the current inspecting process situation. Successively to the start of the collaboration between CASONI SRL and Waygate Technologies, CASONI SRL is able to generate also standard products for design and dimension (UTS Systems). Nonetheless, they still offer a high percentage of customization thanks to the possibility to install one of the many accessories available.APPLICATION FIELDS
Micro angle beam probe for manual inspections on various materials and thin weldings....
Longitudinal shock waves probe for automatic inspections in immersion, straight or focused....
Shaped probe that can inspect in one time a maximum area of 60 mm with an optimal sensibility of the...
Probe with five sensors. In five steps it inspects completely the coupling of the blade to the rotor...
Pencil probe for thickness inspection and micro flaws. Conical 10 mm. delay line with a 3 mm. suppo...
Expansion probe, manual, for holes with a good sensibility. It can be an absolute, differential or a...
Fixed probe, manual, expanding,for holes. It can be an absolute, differential or bridge probe and al...
Probe suitable to check the hardness of materials and the difference of composition of the various m...
Probe for surfaces absolute, necessary for differential devices with transformer system. The sensor ...
Probe for slightly magnetic tubes (from 12 mm to 26 mm diameter)with a permanent magnet that allows ...
Probe for slightly magnetic inner tube inspection (from 9,5 mm to 26 mm diameter). The test can be c...
...
Rotating probe, fixed, in plastic. It ensures a perfect rotation without vibrations, but it is also ...
Standard test blocks set in accordance with ASTM specifications consists in 8 blocks. They can be ma...
It is an aluminium reference standard with three notches that is used for the calibration of eddy cu...
It is a steel reference standard with three notches that is used for the calibration of eddy current...
It is a titanium reference standard with three notches that is used for the calibration of eddy curr...
Standard test blocks set in accordance with ASTM specifications consists of 19 blocks. They can be m...
Manufactured on customer request, this block is used to calibrate rotary or manual eddy current prob...
Step block used for calibration of ultrasonic probes. The step (thickness difference between one ste...
ISS-1500SQ is an automatic system designed for the inspection of mechanical components in immersion....
UTS-1000 COMPACT is an automatic system designed for the characterization of UT probes and for the U...
UTS1-500 is an automatic system designed for the non-destructive ultrasonic inspections of mechanica...
UTS1-500D is an automatic system designed for the non-destructive ultrasonic inspections of mechanic...
Length 2 meters RG174 Device connection Lemo-1- Probe connection Lemo-00-...
Length 2 meters RG174 (Double)TX-RX Device connection Lemo-1- Probe connection Lemo -00-...
Length 2 meters RG174 (Dual)TX-RX Device connection BNC Probe connection Microdot...
Length 2 meters Device connection Amphenol 6 pin Probe connection Lemo-0- 2 pin...
Length 2 meters RG174 Device connection Lemo-1- Probe connection Lemo-1-...
Length 2 meters RG174 Device connection Lemo-1- Probe connection Microdot...
Length 2 meters RG174 Device connection BNC micro Probe connection Lemo-00-...
Length 2 meters RG174 Device connection BNC micro Probe connection BNC...
Length 2 meters RG174 (Dual)TX-RX Device connection Lemo-00- Probe connection Lemo-00-...
Length 2 meters RG174 (Dual)TX-RX Device connection Lemo-00- Probe connection Lemo-00-90°...
Length 2 meters RG174 (Dual) Device connection BNC-BNC Probe connection Lemo-0- 2 pin...
Length 2 meters RG174 Device connection Lemo-1- Probe connection Lemo-00-...
Length 2 meters Device connection Jager 6 pin Probe connection Lemo-0- 2 pin...
Length 2 meters RG174 (Dual)TX-RX Device connection BNC Probe connection BNC micro...
Length 2 meters Device connection Amphenol 4 pin Probe connection Amphenol 4 pin...
Length 2 meters Device connection Fischer 4 pin for Miz 21 (Zetec)...
Length 2 meters RG174 (Dual)TX-RX Device connection Lemo -00- Probe connection BNC micro...
Length 2 meters Device connection Amphenol 4 pin Probe connection Lemo -0- 2 pin...
Length 2 meters Device connection Jager 2 pin Probe connection Fischer 4 pin...
Length 2 meters Device connection Fischer 4 pin for Miz 21 probe connection Lemo -0- 2 pin...
...
...
...
Length 2 meters Device connection Amphenol 15 pin Probe connection Fischer 4 pin...
Length 1,5 meters Device connection Burndy Probe connection Lemo-0- 5pin...
Length 2 meters Device connection Burndy Probe connection Fischer 4 pin...
Length 1 meter Device connection Amphenol Bendix 8 pin Probe connection Fischer 4 pin...
...
Length 2 meters RG174 Device connection Lemo-00- Probe connection Microdot...
Length 2 meters RG174 (Dual)TX-RX Device connection Lemo-00- / Lemo-00- Probe connection Lemo -0- ...
Length 2 meters RG174 (Dual)TX-RX Device connection lemo-0- 2 pi Probe connection Lemo -1- /Lemo -...
Length 2 meters RG174 Device connection Fischer 4 pin per Miz 21 (Zetec) Probe connection Mini Lem...
Length 2 meters RG174 Device connection BNC Probe connection Lemo-00-...
...
Length 2 meters Device connection Canon 7 pin Probe connection Lemo-0- 2 pin...
Length 2 meters RG174 Device connection BNC-BNC Probe connection Lemo -0- 4 pin...
Length 2 meters Device connection Canon 7 pin Probe connection Fischer 4 pin...
Length 2 meters Device connection Lemo 12 pin (Phasec 2D/3D) Probe connection Fischer 4 pin...
Length 2 meters Device connection Lemo 12 pin (Phasec 2D/3D) Probe connection Lemo -00-...
Length 2 meters Device connection Lemo 12 pin Probe connection Microdot...
Length 2 meters Device connection Amphenol 5 pin Probe connection Fischer 4 pin...
Length 2 meters RG174 Device connection Lemo-1- Probe connection Mini Lemo...
Length 2 meters (Dual) IBG coils Device connection Din 15 pin Probe connection Din 5 pin (x 2)...
Length 2 meters Device connection Burndy multipin Probe connection Lemo-0- 2 pin...
Length 2 meters Device connection Lemo-1- FBB 7 pin Probe connection Lemo-0- 2 pin...
Length 2 meters Device connection Lemo-1- FBB 7 pin Probe connection Fischer 4 pin...
Length 2 meters Device connection Lemo-00- Probe connection Lemo-00-...
Length 2 meters RG174 (Dual)TX-RX Device connection Lemo-00- Probe connection Microdot...
Length 2 meters RG174 (Dual)TX-RX Device connection Lemo-1- Probe connection Microdot...
Length 15 meters Device connection Amphenol 28-21Pin Probe connection Amphenol 28-21Pin...
Length 2 meters RG174 / RG58 on demand Device connection BNC Probe connection BNC...
Length 2 meters RG174 / RG58 on demand Device connection BNC Probe connection Lemo-1- ...
Length 2 meters RG174 Device connection BNC Probe connection Lemo-00- 90°...
Length 2 meters RG174 (Dual)TX-RX Device connection BNC Probe connection Lemo-00-...
Length 2 meters Device connection Fischer 8 pin Probe connection Fischer 4 pin...
Length 2 meters Device connection BNC Probe connection Microdot...
Length 2 meters RG174 Device connection Din 3 pin Probe connection Lemo-00-...
Length 2 meters Device connection Fischer 8 pin Rotor connection Fischer 8 pin...
...
...
Length 5-10-15-20-25 meters. System connection Amphenol 4 pin Probe connection Lemo 4 pin (IMH) ...
Teflon adhesive tape, thickness 0,3 mm for the protection against wear of the eddy current probes....
Push and pull cable gun for the EC automatic and/or manual inspection of inner tubes. - Cable diame...
